GRACE MX II Operating instructions
Page | 101
Now place the components on the front of the
pedals and push it from behind with the second
mounting wedge. Then set the M4 nuts on the
bolts. Please note that the inclination of the wedge
is placed in a way that the reflector is perpendicular
to the pedal surface.
Now tighten the screws using the above tool. Do
not tighten the screws too firmly. You should still
be able to align the reflector.
Align the centre of the reflector housing and
tighten the screws permanently. Tip: If you hold
the screwdriver still while tightening the screw and
only turn with the wrench, the housing will slip
less.
Clip the reflector into the reflector housing.
Repeat the process for both pedals and on both
sides of the pedals
