Page |
98
GRACE MX II Operating instructions
2.6.
Adjusting the saddle angle
To change the angle and horizontal position of
the saddle, undo the two SW6 hexagon sockets
on the saddle clamp which are positioned
immediately behind the saddle post above the
rear wheel.
You can now move the saddle forwards and
backwards in the guide and adjust the angle.
Afterwards, retighten both screws again (see
torque table).
2.7.
Adjusting the position of the brake lever
Undo the screw on the handlebar clamp with a Torx T25 spanner to twist and move the
brake lever on the handlebar. After adjustment, re-tighten the screw again (see torque
table).
The brake levers are configured correctly when your fingers can reach the
brake levers when your arms are outstretched. The wrist should be stretched
out as much as possible.
