GRACE MX II Operating instructions
Page | 117
5.9.
Setting the belt guide
Urban
The gap A between the belt guide and the back
of the belt should lie between 1 - 1.5 mm (0.04 -
0.06 in). To adjust the gap undo the screw with a
hexagon socket SW5 (0.2 in) and move the belt
guide in the elongated bore.
Tighten the screw again with a hexagon socket SW5
(0.2 in) (see torque table).
5.10.
Drive chain
Trail
The chain should always be metallically clean and have a sufficient coating of lubricant.
If the chain is dry (without lubrication) or dirty, clean it with a clean or slightly oily cloth and
then coat it with a standard, commercially available bicycle chain oil and leave it overnight.
Remove any excess oil the following day with a cloth.
5.11.
Switching gears
Trail
For information about the gearshift adjustment,
please refer to the attached manual from
manufacturer SRAM
A
