GRACE MX II Operating instructions
Page | 125
8.8.
Handlebar grips
Handlebar and grip surfaces are subject to function-related wear and may need to be
replaced at regular intervals. The grips must always be firmly attached to the handlebars.
8.9.
Lubricants
Lubricants change their properties in time. For this reason you should regularly clean and re-
lubricate all lube points to prevent increased wear on the affected parts and bearings.
8.10.
Handlebars and saddle post
Both the handlebars and the saddle post are subject to strong dynamic loads while riding.
Therefore, check them at regular intervals for externally visible damage, replace when
necessary. We also recommend you replace these parts every two years with heavy use of
the GRACE MX II.
8.11.
Moving parts and bearings
All moving parts and bearings are subject to use-related wear. The degree of wear depends
on how the bike is maintained, services and how it is used (distance, riding in rain, dirt, salt).
8.12.
Frame paint and coating
The coatings on the parts of your GRACE MX II protects them from corrosion. Regularly
check all paint surfaces for damage and touch up these surfaces right away. This also
preserves the look of your bike.
