GRACE MX Manual 2013 Page | 75
Wearing parts, maintenance and vehicle inspection after a fall
Some parts and components on your GRACE MX are susceptible to wear due to their
function and must be monitored with particular care for that reason and regularly
maintained or replaced.
Wearing parts include the following:
Tyres
Wear to the tyres depends on how the GRACE MX is used and can be very strongly
influenced by the rider. The lifespan of a tyre is significantly shortened by sharp braking
which leads to the blocking of a tyre and reduces its life span considerably. In addition, tyre
pressure should be checked regularly and tyres should be pumped to the level specified by
the tyre manufacturer.
Brake pads
Due to their function, brake pads are susceptible to wear, which is very dependent on how
the GRACE MX is used. If the bike is used for sports or for trips on routes with steep inclines,
it may be necessary to change the brake pads at frequent intervals. Therefore, it is
absolutely essential to check the state of wear of the brake pads regularly. Have them
replaced by a dealer, if necessary.
Belts
The Gates carbon drive belt must always be replaced, if it has been damaged due to
improper handling or significant external influences. For instance, a stone, a root or an item
of clothing may be seized by the belt and caught between the belt and the sprocket. An
incident of that kind can lead to damage being done to the sensitive carbon fibres inside the
belt, even if there is no external damage to the belt to be detected. If you suspect that the
belt has been damaged, have it replaced in order to avoid the risk of accident or injury.
