GRACE MX Manual 2013 Page | 55
Connect the charger plug to the battery, which is
switched off. The charger display will blink.
In order to ensure that the battery is fully
powered, charge it fully with the charger before
you use it for the first time. The battery is fully
charged, if all 5 LEDS stay lit up.
After the battery is fully charged, the charging
process will be interrupted automatically.
Disconnect the charger from the power supply
and the battery from the charger. The battery
will be automatically switched off in the process.
The battery can be charged at any time without
shortening its life span. Interrupting the charging
process will not damage the battery.
After the charging process has ended and the
battery has been installed, the battery holder
must be snapped into place.
Please take note of the information of the original instructions for the BOSCH
Drive Unit Cruise | Intuvia | PowerPack 300 | PowerPack 400 | Charger page
02: Assembly
