Page | 72 GRACE MX Manual 2013
Lever the tyre bead over the rim flange with the
installation tools.
Pump the tube until the tyre assumes its shape
and check to see if it is sitting correctly on the
rim.
Pump the tyre in accordance with the
manufacturer’s specifications (max. 4.5 bar, 60
psi) and check again that the tyre is sitting
correctly in the rim.
Tighten the knurled nut and screw the valve cap onto the valve.
Mounting and dismounting the pedals
Lightly grease the threads of the pedal axles and the cranks.
Screw in the pedals only loosely by hand. Make sure to bring the parts together in the right
angle and do not tilt them.
The right pedal has a hand right tread and the left pedal has a left-hand thread
on the pedal axle for mounting on the crank. The right pedal is screwed
clockwise and the left counter clockwise.
Move the crank into a horizontal position so that
the pedal points towards the front wheel.
Place the wrench (15mm) at the pedal axle and
hold the crank firmly on the opposite side.
Tighten the pedal with the torque specified by
the manufacturer of the crank.
Dismounting is performed in reverse order of
mounting.
