Assembly of the A34
TM
Quilting Frame
B
EFORE
Y
OU
B
EGIN
Using the preceding parts list as a reference, take the parts out of the box and make sure your package is complete.
(If there is something missing or damaged,
do not call the store or dealer from whom you purchased the
product
. Please contact The Grace Company directly at 1-800-264-0644).
T
OOLS
N
EEDED
To assemble your frame, you will need the following common tools:
1. One 1⁄2” wrench
2. Phillips Head Screw Driver
3. Wing Grip Tool (to easily tighten and loosen plastic knobs--provided)
4. Allen Wrench (provided)
Ø
Note:
To help you distinguish between wood parts, all Left Side parts are marked with an “L” grooved into the wood on
the inside of the part. Right side parts are also marked with an “R” on the inside. The first four steps will involve installing
hardware into parts and performing other sub-assemblies in preparation for further steps.
Ø
This is a new product! We welcome your feedback on this product or these instructions. If you encounter
a problem during assembly or use of the Grace A34
TM
, and you can’t seem to overcome it, call us before
frustration sets in!
J
1-800-264-0644.
Ø
NOTE!
Read each step all the way through before actually assembling parts in that step.
S
TEP
1: L
AMP
H
OLDER
TO
P
OLE
M
OUNT
E
ND
A
SSEMBLY
P
ARTS
N
EEDED
:
1 – L
EFT
P
OLE
M
OUNT
E
ND
1 – R
IGHT
P
OLE
M
OUNT
E
ND
2 – R
IGHT
AND
L
EFT
A
CCESSORY
T
RAY
2 – 1⁄4”
X
45
MM
C
ONNECTOR
B
OLT
2 – R
ECTANGLE
N
UT
Ø
Attach the Right Accessory Tray to the Right Pole Mount End by placing a 1⁄4” x 45mm connector bolt
through the hole at the front of the Pivot Section, with the head of the bolt on the outside.
Ø
Place a 1⁄4” rectangle nut in the cross slot of the Left Accessory Tray and thread the bolt through the nut, as
illustrated below.
5
Right Pole Mount End
Inside View
1/4" X 45mm
Connector Bolt
1/4" Rectangle
Nut
Right Accessory
Tray
