S
TEP
4: B
RACE
A
SSEMBLY
P
ARTS
N
EEDED
:
4 – B
RACES
4 – 5/16”
X
1 1⁄2” H
EX
B
OLT
4 – 5/16” F
LAT
W
ASHER
Ø
In this step, you will pair the brace pieces together to form the upper and lower braces.
Ø
Take two braces and line them up with each other as pictured. (Now is the time to select the size of frame
you want to initially assemble. See the chart on the following page for guidance. Crib size is pictured on this
page).
Ø
IMPORTANT!
Be sure the inserted metal T-Nut on the end of each brace is facing away from the other
brace (toward the outside)!
Ø
Place a 5/16” x 1 1⁄2” hex bolt
with 5/16” (larger) flat washer
through the selected long slot of the one
brace and into the hole and T-nut of the other brace.
Ø
Repeat these instructions for the other set of braces.
LEAVE THE HEX BOLTS LOOSE AT THIS POINT, ALLOWING THE BRACES TO TELESPCOPE IN
AND OUT.
8
Brace Assembly
5/16 X 1 1/2"
Hex Bolt
5/16" Flat Washer
