S
TEP
8: F
INAL
F
RAME
A
DJUSTMENTS
Ø
After all the poles are in place, adjust the Upper Brace so that all the poles will roll freely but will
not move much from side to side.
Ø
Tighten the 5/16” hex-head bolts that are in the slots on the Upper Brace.
Ø
Adjust the Lower Brace so that the tilt action will move smoothly and easily.
Ø
Tighten the 5/16” hex-head bolts that are in the slots on the Lower Brace.
Ø
Double-check the Brace to Stand Assembly, making sure all connections are completely tightened.
F
OLDING
AND
S
TORING
THE
A34
TM
Ø
Folding the A34 is a very basic,
tool-free process.
Ø
Loosen the plastic knob at each
leg/end piece connection on
the inside of the Right and Left
Ends.
Ø
As you loosen the last plastic
knob, you will want to stabilize
the frame to prevent it from
collapsing.
Ø
With all four plastic knobs
loosened, grip the frame by
the front and middle (or back)
poles and lift up.
Ø
Gently let the frame down,
allowing the legs to fold in,
parallel with the end pieces.
Ø
Retighten the four plastic knobs so the legs hold their folded position.
Ø
The A34 can be stored leaning against a wall, or lying flat on the floor. If lying
the frame flat, be cautious about floor moisture affecting the frame.
14
Frame Folded
With 4th Rail
