Grabo NEMO, Operator'S Manual

Page: 20 / 174

20
EXPLANATION OF VISUAL INDICATORS
Nemo GRABO®
Signal
Meaning
No light The Nemo GRABO® is turned off
LED flashes green Battery capacity is low/empty
Charge the battery
LED is continuously green 1 Bar = 20% full
2 Bar = 40% full
3 Bar = 60% full
4 Bar = 80% full
5 Bar = 100% full
Battery Charger
Signal
Meaning
LED is continuously red Battery is charging
LED is continuously green Battery is fully charged
MAINTENANCE
WARNING:
Changes to the tool and technical modifications are not permitted. This can lead to
injury. If the tool fails despite the care taken in manufacturing and testing procedures, repair shall be
carried out by an after-sales service centre for the Nemo GRABO®.
REPLACING THE RUBBER FOAM SEAL
❽
Remove the rubber foam seal if it has become worn or damaged.
1. Pull out the rubber foam seal Ⓗ .
2. Gently press a replacement rubber foam seal into position.
3. Make sure that the replacement rubber foam seal fits correctly and securely.
REPLACING OR CLEANING THE AIR FILTER
❾
Clean the filter when dirty. The filter needs to be replaced when the filter is badly worn or ripped (at
customer’s discretion). This is determined by how the Nemo GRABO® is being used. When lifting
clean material, the filter will last longer than when being used on dirty/dusty materials.
1. Turn the Nemo GRABO® upside down.
2. Use the tip of a screwdriver to remove the air filter lock ring Ⓙ and the air filter pad Ⓘ .
3. Do one of the following:
a. Clean the filter with compressed air, or
b. Insert a replacement air filter pad.
4. Insert the air filter lock ring to secure the filter.
EN
NL
DE
FR
ES
IT
SE
DK
AR
RU
TR