GPS TrackMaker Reference Manual Download Page 79

Page: 79 / 176

8 Special Functions

8.1 Altitude Profile

The Altitude Profile is a graphic that shows the altitudes of a Tracklog in its whole length and the nearest
Waypoints.

To show the Altitude Profile, select the Tracklog and then press

. The window below will be shown:

Grid lines color and Altitude Profile background color are the same of the main map.
To configure other elements from the Altitude Profile, see

Configuring the Altitude Profile

Zoom

F2 and F3 keys activate

Zoom In and Zoom out respectively.

F4 or

centralizes the Profile on screen.

Using the Mouse

Dragging the mouse with the right button pressed, the Profile will move to the chosen position. Pressing the left
button, a small pin will mark the distance x altitude of the chosen point.

Summary of Contents for TrackMaker

















































































































































































Search results

Summary of Contents for TrackMaker

Reviews:

Related manuals for TrackMaker

Brands by name

Popular brands

GPS TrackMaker, Reference Manual

Search results

Summary of Contents for TrackMaker

Reviews:

Related manuals for TrackMaker

Brands by name

Popular brands