your ESN by selecting the Cellular (WAN) page -> “Status” tab or on the label on the
bottom of your Logic-5000 unit.
For manual activation, you will also need the following specific information from the
provider:
Mobile Directory number (
MDN
)
Mobile Station ID (MSID or
MIN
). In many cases, this number will be the same as
the MDN.
Unlock Code (if required)-provided by most carriers when activating a contract.
Figure 6
- Cellular (WAN) page, Activation
4.6.1.
Provisioning with Verizon Wireless
1.
On the left side of the screen, select the Cellular (WAN) page. Select “Activation”
tab.
2.
In the “OTASP/IOTA Activation” portion of the screen (Figure 9), select “OTASP”.
Click Submit.
Note: “Command (OTASP Only)” is a carrier specific command used for OTASP. The
default value is *22899 (Verizon OTA command).
3.
After a few moments you will receive a message saying the OTA was successful.
Once OTA is complete, the unit will reset.
4.
Once the module is activated, browse to an Internet web page to confirm
connectivity.
Page 18 of 59
