Figure 5
- Logic-5000 radio modem Home page
4.6.
Provisioning the Logic-5000 Radio Modem
IMPORTANT NOTE:
The Logic-5000 cellular radio modem requires an active cellular data service
contract for provisioning. Verify that your cellular service contract is a data
service contract with packet data NOT circuit switched technology. If you do not
have an active data contract, contact your service provider.
Note:
The Logic-5000 radio modems are carrier specific. You must activate your unit
with the carrier specified when the product was ordered. The unit must be
activated in the carrier’s home area.
Depending on your carrier, the Logic-5000 radio modem can be activated manually (see
Figure 6) or using OTASP (Over-The-Air Service Programming) or IOTA (Internet Over-The-
Air) (see Figure 6). In either case, the carrier will require you to provide them with the
ESN
(electronic serial number) that is assigned to the cellular modem at the factory. You can see
Page 17 of 59
