S SERIES
OM--05096
PAGE A -- 1
SAFETY
SAFETY - SECTION A
This information applies to S-Series
submersible motor driven pumps.
Do not operate this pump where explo-
sive vapors or flammable material exist.
Death or serious injury will result.
Before attempting to open or service the
pump:
1. Familiarize yourself with this man-
ual.
2. Unplug the pump power cable to
ensure that the pump will remain
inoperative.
3. Allow the pump to cool if over-
heated.
This pump is designed to handle dirty
water that does not contain large en-
trained solids. It is not designed to
pump volatile, flammable or corrosive
materials. Do not attempt to pump any
liquids which may damage the pump or
endanger personnel as a result of pump
failure.
Never attempt to alter the length or re-
pair any power cable with a splice. The
pump motor and cable must be com-
pletely waterproof. Damage to the pump
or personal injury may result from alter-
ations.
After the pump has been installed, make
certain that the pump and all piping or
hose connections are secure before op-
eration.
Do not attempt to lift the pump by the
power cable or piping. Attach proper
lifting equipment to the lifting handle
fitted to the pump.
Obtain the services of a qualified elec-
trician to troubleshoot, test and/or ser-
vice the electrical components of this
pump.
Pumps and related equipment must be in-
stalled and operated according to all na-
tional, local and industry standards.
