MDE-LEDI-NETWORK-TDS-4099V3.0
7
E
NG
LI
S
H
1.
INTRODUCTION
This document is the instruction manual for the
LEDI
®
NETWORK TDS V1
and the
LEDI
®
NETWORK TDS GPS Rail Din TH 35
. These products are accurate and easily configurable
time servers.
Each server communicates through the following network protocols:
►
IPv4 et IPv6
►
HTTP(S)
►
SNMP v1, v2c, v3
►
Telnet
►
SSH
►
FTP
►
SMTP
►
Syslog
►
(S)NTP
►
ENDMI (to detect Gorgy Timing
products on the IP network)
Security features ensure that the server delivers reliable and continuous timing information.
1.1. LEDI
®
NETWORK TDS V1 RACK
The server synchronises through an NTP Ethernet 10/100 base T or DCF or GPS time input.
In case of a DCF or GPS input, the heart of the time base is a temperature-compensated
quartz oscillator (TCXO) which limits deviation when the time source is unavailable.
There are 3 available time outputs: AFNOR NFS 87500 / IRIG B, IMPULSION, NTP.
