64
MDE-LEDI-NETWORK-TDS-4099V3.0
►
Uncheck the
“Disable the output card” box and press “Save Settings” to start the pulse
generation in high-speed (1 pulse every 2 seconds) or put it on hold if the time catchup
is too long (this time depends on the format and the 30 or 60 second mode). High-speed
(or standby) will be automatically stopped when the distributed time is equal to the time
base shown on the front panel display and corrected for any local time offset.
☛
If an impulsion is shifted, adjust the polarity by sel1 or -
1 in the “Relative
Correction” field and then press “Save Settings”.
5.2.10. "Interface" Page
On this page you can configure the various management interfaces of the
LEDI
®
NETWORK
TDS.
A. User Accounts
This section allows you to configure the user accounts in order to limit access to the
LEDI
®
Network TDS
.
Disable root account
►
By default, the
LEDI
®
Network TDS
has a root account to connect to the server.
This account can be disabled to ensure maximum security. The only way to access
the server then is through the administrator account, which is defined in the next
field group. If the password for the administrator account is not known, the only way
to regain access to the server is to return to the default settings. All changes to the
settings will be lost and the root account will be reactivated.
Change admin/user password
►
Check this box to modify the username
and password for the administrator
account.
The default administrator account credentials are:
Username: admin
Password: password
