42
MDE-LEDI-NETWORK-TDS-4099V3.0
The first section displays the current status, while the second section is used to configure
the settings:
►
Address from DHCP server
If this box is checked, the
LEDI
®
NETWORK
TDS
will attempt to get an IPv6 address from a
DHCP server at start-up. Failure to obtain an address this way will result in the server using
its automatically configured address.
By unchecking the box, the following settings become available:
►
IP Address
Configures the IPv6 address of the
LEDI
®
NETWORK TDS
in either a reduced format (i.e.
fc00::0001) or in complete format (i.e. fc00:0000:0000:0000:0000:0000:0000:0001)
►
Subnet Prefix length
Sets up the length of the submask prefix in bits. For example, a value of 64 means that
the first 64 bits (fc00:0000:0000:0000: in the previous example) define the subnet in
which the
LEDI
®
Network TDS
is located.
►
Gateway address
If the
LEDI
®
Network TDS
is to communicate with devices outside the subnet, the IPv6
address of the subnet gateway must be specified. Can be written in short form (i.e.
fc00::8) or full form (i.e. fc00:0000 :0000:0000:0:0000:0000:0008).
If you do not wish to use a gateway for IPv6 communications, simply leave the default
value in the
gateway
field (0000:0000:0000:0000:0000:0000:0000:0000).
Additional settings
In the last part of the page, the following settings can be configured:
