Gorgy Timing LEDI NETWORK TDS GPS RAIL DIN TH 35 User Manual Download

Page: 51 / 101

MDE-LEDI-NETWORK-TDS-4099V3.0

"NTP Client" Section

If the option is installed, the

LEDI

NETWORK

TDS

can synchronise with up to 5 NTP

servers. The NTP client actually sends requests to only one server at a time, but it is able to
automatically switch to another server in case the one it is using stops responding or does
not send enough responses.

Polling rate

►

This list defines how often the

LEDI

NETWORK TDS

queries the NTP servers for

synchronisation.

Number of requests

►

This list configures the number of NTP messages to be sent in a request stream at the
desired polling rate.

Summary of Contents for LEDI NETWORK TDS GPS RAIL DIN TH 35






































































































Search results

Summary of Contents for LEDI NETWORK TDS GPS RAIL DIN TH 35

Reviews:

Related manuals for LEDI NETWORK TDS GPS RAIL DIN TH 35

Brands by name

Popular brands

Gorgy Timing LEDI NETWORK TDS GPS RAIL DIN TH 35, User Manual

Search results

Summary of Contents for LEDI NETWORK TDS GPS RAIL DIN TH 35

Reviews:

Related manuals for LEDI NETWORK TDS GPS RAIL DIN TH 35

Brands by name

Popular brands