38
EN
PV detection
The connection of the PV module to the heat pump must be performed by a qualified expert. On the back side of the heat
pump, under the connection cord, there is a PV connection port. The PV port is shown in
figure 22
. Use a connection cord
(minimum inner cross-section 0,5 mm
2
, H05VV-F 2G 0,5 mm
2
and maximum external cross-section of 10 mm). The removal of
the cover is described in the chapter above
Figure 22:
PV connection location
Connect the cord to the clamp, located under the control unit. The connection location is marked with PV.
Use ports 1 and 2.
Figure 23:
PV connection port
