Gorenje GDV642XL A, Operating Instructions Manual

Page: 64 / 144

Action Possible causes Problem
Rinse off these types of foodstuffs if
not starting the dishwasher immedi-
ately. Why not use the Rinse & Hold
programme. Some foodstuffs, such as mustard,
mayonnaise, lemon, vinegar, salt and
dressings, can cause spots on stain-
less steel if left for too long. Spots on stainless steel or silver.
Silver and stainless steel items should
not come into contact during dishwash-
ing. All stainless steel can cause spots on
silver if they come into contact during
dishwashing. Aluminium can also
cause spots on dishes.
Use a detergent with a bleaching
agent. Lipstick and tea can be difficult to
wash off. Spots left after washing.
Check that the dishes are placed se-
curely. Spin the spray arms to make
sure they can rotate. The dishes are not correctly placed or
the spray arms are not rotating. Rattling sound when dishwashing.
Press and hold the main power switch
until the display lights up. You have forgotten to turn on the main
power switch. The dishwasher does not start.
Check. The door is not properly closed.
Check. A fuse/circuit breaker has been
tripped.
Check. The plug is not plugged into the wall
socket.
Check. The water tap is turned off.
Check. Overflow/leaks.
Turn off the water tap. Pull out the plug
and call the service division. A whirring sound (the drainage pump)
is heard from the dishwasher and does
not stop when the main power switch
is turned off.
Press and hold Start/Stop for three
seconds if you want to cancel the
Delayed start option. Check that the Delayed start option
has not been selected.
None, next time the programme is run
the corrected time will be displayed. The programme is taking longer than
estimated. 1 minute appears in the display.
Loosen the drainage hose where it
connects to the sink unit's water trap.
Check that no debris has fastened. Is
the cone-shaped part of the pipe cut
to an inner diameter of at least 14 mm? Blocked drainage hose. Water remains in the dishwasher.
Check that the hose is free from kinks
and sharp bends. Kink in drainage hose.
Clean the coarse and fine filters. The filters are blocked.
Clean the drainage pump. See the
section Care and cleaning. Debris in the drainage pump.
64 English
Troubleshooting