Gorenje GDV642XL A, Operating Instructions Manual

Page: 59 / 144

Drainage pump
The pump can be accessed from inside the
dishwasher.
1. Cut the power to the dishwasher by pulling out
the plug from the wall socket!
2. Remove the coarse filter and pipe section.
3. Remove the small yellow fitted piece at the left
of the bottom drain (see illustration below).
4. By inserting your finger into the hole you can
turn the pump blade to release anything blocking
it.
5. Reinstall the fitted piece and filters.
6. Plug the machine in again.
If the dishwasher still does not start and a
whirring sound is heard, the overflow protection
has been activated.
•
Shut off the water.
• Remove the plug from the wall socket.
• Call the service division.
NOTE!
Do not forget to reinstall the fitted piece.
Lower spray arm
Holes and bearings can sometimes become
blocked.
1. Pull the lower spray arm straight up to release
it.
2. Remove any debris using a needle or the like.
The spray arms also have holes underneath.
Upper spray arm
The upper basket must be removed before the upper
spray arm can be released.
1. Pull out the upper basket and turn the basket
catch on each runner outwards (see illustration).
The basket can now be removed.
2. Loosen the upper spray arm in the same manner
as the lower spray arm and clean it.
English 59
Care and cleaning