Gorenje AQUA ECOLOGIC 25C, Instructions For Use, Maintenance And Installation Manual

Page: 94 / 98

EN
41
•
When the temperature of heating water begins to gets closer to set temperature,
combustion device starts modulation or regulation/reduction of power. In this state,
display indicates "
regu H2O ", and upper display alternately shows power (P is the level
of boiler operation, d is the level of boiler setting), and lower display shows
temperatures.
•
"Cool flui"
– state of shutting down, indicated on the display when combustion device
reaches set temperature of heating water in the boiler with addition for regulation (if the
temperature of heating water is set to 70 °C, the boiler enter "cool flui" state at 75 °C).
When the boiler finishes "Cool flui" state, it means that the heating water in the boiler
cooled down. It goes to:
•
"Test fire"
– and the ignition procedure is repeated.
Control of information on operation of combustion device requires menu access into
programme of information (shown data is only illustrative). Enter the menu with long press on
MENU button (see
figure 22, page 58 ), when the display shows "tH2O", release the button.
Use + and - buttons to select desired information.
Displayed information is:
•
tH2O Temperature of heating medium in the boiler
•
rH2O Temperature of heating medium on return,
•
tFLU Temperature of smoke gases ((H
2
O) + 30-
90 °C),
•
tChb Temperature of fire in the combustion chamber
(615 °C +- 40 °C),
•
floU Intake of fresh air into combustion device
(480 °C +- 40 °C),
•
FanI Voltage on FAN 1 (130 V +- 15 V),
•
FedI Precentage of pellet dosing into the burner (70 % +-20 %)
Once you have completed viewing information, use + and - buttons to find information
"tH2O". When finding it, short press ON/OFF button to return to previous state.
If the display indicates "alarm", cause of the alarm must be determined with alarm list.