English
•
Owner´s manual
36
Maintenance during the storage period
1) During the storage period of the machine, the storage requirements mentioned above must be
complied with.
2) Examine abnormal phenomena such as rust, corrosion, aging and deformation and parts every month,
find out the problems and eliminate them in time.
3) The engine crankshaft should be turned every two months to prevent internal rusting. Remove old
grease and replace new grease in the lubrication area where grease is needed.
4) Forklifts should be started every three months and driven at low speed for 20-30 minutes to check for
abnormal phenomena in all parts.
6. TECHNICAL DATA
Model
GY 750CT
Engine
4T (OHV)
Displacement
212 cc
Power rating
4,4 kW / 3600 rpm
Maximum power
5,3 kW - 7 hp
Speeds
First gear: 2.3 km/h
Second gear: 3.4 km/h
Third gear: 4.8 km/h
Reverse: 2.1 km/h
Clutch
Belt
Freno
Internal expansion
Number of track nodes
38
Track width
180 mm
Distance to the center of the runway
660 mm
Minimum ground clearance
130 mm
Minimum turning distance
2,5 m
Minimum climbing capacity
(without load)
≥25º
Dimensions
2035 x 890 x 1190 mm
Maximum load capacity
750 kg
Unladen weight
270 kg
For further details, please refer to the motor’s instruction manual.
