background image

User Manual V1.0-2022-02-18

01

01 Safety Precaution

01    Safety Precaution

DANGER

• 

Please  keep  Power  Off  before  any  operations  to  avoid  danger.  Strictly  follow  all  safety 

precautions outlined in this manual and safety labels on the equipment.

•  All installation operations should be performed by trained and knowledgeable technical 

personnel who are familiar with local standards and electric systems. Learn about the 

product before installation.

•  Do not use the battery or the power control unit if it is defective, broken, or damaged.

•  Do not disassemble, modify, or replace any part of the battery or the power control unit 

without official authorization from the manufacturer.

•  Damaged battery may leak electrolyte. Do not contact with the liquid leakage or volatile 

matter. Please contact  After-sales Service for help immediately.

WARNING

Anyone contact the leaked substance accidentally has to do as following:

• 

Breath  in  the  leaked  substance:  Evacuate  from  the  polluted  area,  and  seek  immediate 

medical assistance.

• 

Eye contact: Rinse your eyes for at least 15 minutes with clean water and seek immediate 

medical assistance.

•  Skin contact: Thoroughly wash the touch area with soap and clean water, and seek immediate 

medical assistance.

•  Ingestion: Induce vomiting, and seek immediate medical assistance.

•  Do not move the  battery system if it is connected with external battery expansion modules. 

Please contact After-sales Service to replace batteries or add batteries.

CAUTION

Transportation:

•  Protect the battery system from damage during transportation and storage.

•  Take the weight of the battery and the power control unit into account and carefully lift the 

battery and the power control unit.

•  Wear gloves when handling the battery.

•  Do not hit, pull, drag, or step on the battery system or put unrelated items into any part of 

the battery system.

•  The transportation must be carried out by trained professionals. All operations during the 

process have to be recorded.

•  Keep the equipment stable to avoid dumping, which can result in equipment damage and 

personal injuries.

• 

In the event of a fire, please make sure that the carbon dioxide extinguisher or Novac1230 

or FM-200 is nearby.

• 

The fire cannot be put out by water or ABC dry powder extinguisher. Firefighters are required 

to wear full protective clothing and self-contained breathing apparatus.

• 

The battery may explode when the ambient temperature exceeds 150℃.

•  Please use appropriate tools and take protective measures when installing and maintaining 

heavy equipment. Improper operations will cause personal injuries.

•  Use professional insulating tools when operating the equipment under high voltage.

•  Place the cables at lease 30mm away from the heating components or heat sources, 

otherwise the insulation layer of the cables may be aging or broken due to high 

temperature.

• 

Tie the cables of the same type together, and place cables of different types at leas 30mm 

apart. Do not place the cables entangled or crossed.

Summary of Contents for Lynx Home F Series



























Reviews: