05 System Installation
13
User Manual V1.0-2022-02-18
Connecting the Battery Power Cable
(Compatible with EHB Series Inverters)
Notice
•
Use a power cable to connect the EHB series inverters and the Battery System. The cross-
sectional area of the power cable conductor: 16mm
2
(AWG 6). The strip length of the conductor:
18±1mm. The drawing force of the cable after crimping should be at least 1200N.
•
Make sure that the striped conductor is fine and has no burrs.
•
The copper tube should be prepared by customers. Copper tube length: 17mm. Copper tube
inner diameter: 5.80mm.
Step1:
Strip the conductor and put it into the copper tube.
Step2:
Crimp the power cable.
Step3:
Tighten the nut.
Step4:
Connect the power cable.
Click
