- 22 -
TROUBLESHOOTING
If it appears that your DVD-Video player is faulty,
first examine with this checklist. It may be that
something simple has been overlooked.
Under no circumstances should you try to
repair the player yourself. Only qualified
service personnel can remove the cover or
service this player.
NO POWER
• Check if power plug is properly connected.
• Check if there is power at the AC outlet by
plugging in another appliance.
NO PICTURE
• Check if the selector for SCART/COMPONENT
video on the rear panel is correctly selected.
• Check if the TV is switched on.
• Select the correct AV input on the TV.
• Check the video connection.
• Check that the correct source has been selected
on the TV in relation to the connection method
used to connect the Micro system to the TV. For
further information consult the instruction manual
supplied with the TV.
DISTORTED PICTURE
• Check the disc for fingerprints and clean with
soft cloth, wiping from centre to edge.
• Sometimes a small amount of picture distortion
may appear.
This is not a malfunction.
COMPLETELY DISTORTED PICTURE
• The disc format does not match the TV-set used
(PAL/NTSC).
NO COLOR IN PICTURE
• The disc format does not match the TV-set used
(PAL/NTSC).
• Ensure that there is only one video output
connected.
DISC CANNOT BE PLAYED
• Ensure the disc is label side up.
• Clean the disc.
• Check if the disc is defective by trying another
disc.
NO SOUND
• Check audio connections.
• If using a HiFi amplifier, try another sound
source.
NO RETURN TO START-UP SCREEN WHEN
DISC IS REMOVED
• Check to see if the program requires another
disc to be loaded.
• Reset by unplugging the player from the power
supply, then connect the power supply again.
THE PLAYER DOES NOT RESPOND TO THE
REMOTE CONTROL
• Aim the remote control directly at the sensor on
the front of the player.
• Avoid all obstacles which may interfere with the
signal path.
• Inspect or replace the batteries.
NO AUDIO AT DIGITAL OUTPUT
• Check the digital connections.
• Check the Digital Out menu to make sure that the
digital output is correctly set.
• Check if the audio format of the selected audio
language matches your receiver capabilities.
BUTTONS DO NOT WORK
• Unplug the player from power outlet and
reconnect after a few seconds.
YOU HAVE FORGOTTEN THE PASSWORD
• In DISC or CARD mode, press SETUP key on the
remote control to access the setup menu, move
the highlight to the password option, then enter
the number key 7,6,4,1,8, press
/ ENTER key to confirm. The password option
will be unlocked.
THE DISC IS STUCK INSIDE THE PLAYER
• In case the disc is stuck inside the tray, please
disconnect the power first, wait for at least 2
minutes, then plug the unit back in (Do Not Power
On The Unit) and press disc tray open button.
Summary of Contents for GMC6039DVD
Page 1: ......
