13
TA BUTTON(TRAFFIC ANNOUNCEMENT)
When pressed briefly, TA mode will be switched on. Press again to switch TA mode off.
The following will happen if TA mode is selected and a traffic announcement is transmitted:
- When the unit is in CD mode, it will switch to radio mode temporarily.
- If the volume is set to a low level, it will be raised to a preset level.
- TP will show in the display when the unit is tuned to a station that is capable of broadcasting
traffic information.
- To cancel a Traffic announcement and return to the previous mode, press the TA button.
When pressed
for more than 2 seconds,
EON TA LOCAL /EON TA DISTANCE mode is selected.
- EON TA LOCAL mode.
TA reception can be adjusted to receive local or local + long distance announcements.
Note:
If TA is selected, when the tuning up/down buttons are used, the unit will only
search for stations that broadcast traffic announcements.
Some broadcasting stations may change their program from normal broadcasting to regional
broadcasting for a certain period. When regional mode is off, the region identification in the PI
code is ignored; the radio may switch to a local variant of the current program. When regional
mode is on, the radio will only switch to a program carrying the exact same PI code.
Note:
If AF is selected, when the tuning up/down buttons are used, the unit will only
search for stations with RDS data.
PTY BUTTON
When this button is pressed, the PTY mode will toggle in the following order:
PTY Music Group -> PTY Speech Group ->PTY Off
Music Group
Speech Group
1
POP , ROCK
NEWS, AFFAIRS, INFO
CLAS SIC S,
CULTURE, SCIENCE, VARIED
JAZZ, COUNTRY
EASY, LIGHT
SPORT, EDUCATE, DRAMA
NATION, OLDIES
SOCIAL, RELIGION, PHONE IN
FOLK
TRAVEL, LEISURE, DOCUMENT
2
3
4
5
6
WEATHER,FINANCE, CHILDREN
The current PTY code is displayed on the LCD, use the 6 preset buttons to select the other
PTY codes, the distribution of program types are as follows:
Button Number
When PTY code is selected, the radio will search the band for the station that matches the
PTY code.
AF BUTTON(ALTERNATIVE FREQUENCIES)
When pressed briefly, AF switching mode is selected.
When AF switching mode is selected, the radio will check the signal strength of the AF
constantly
.
When pressed for 2 seconds, it will activate the regional mode.
Note: To check whether an alternative frequency is a real alternative for the current
station, the radio compares PI codes (programme identity).
- Regional mode ON:
The PI codes must be identical. REG icon will show in the display.
- Regional mode OFF:
The regional identification code in the PI code is ignored.
RDS OPERATION
06
7
6
16
