OT
O
B
T
M
- DIN REAR-MOUNT (METHOD B)
Installation using the screw holes on the sides of the unit.
Fastening the unit to the factory radio mounting bracket.
1. Select a position where the screw
holes of the bracket and the screw
holes of the main unit become
aligned (are fitted) and tighten the
screws at 2 places on each side.
2. Screw
3. Factory radio mounting bracket.
4. Dashboard or Console
5. Hook (Remove this part)
Note: the mounting box, outer trim ring,
and half-sleeve are not used for method
B installation.
5
2
4
3
2
5
a. Trim Ring
b. Insert fingers into the Trim Ring as
shown and carefully remove.
c. Insert the levers supplied with the
unit into the grooves at both sides of
the unit as shown until they click.
Pulling the levers makes it possible
to remove the unit from the
dashboard.
- Trim Ring Installation:
Removing the unit
a
b
c
- PANEL OPEN/CLOSE OPERATION
1
N
C
I
D
SE
R
T
E
2
1. Press Open button
2. The CD slot will be accessible.
3. After CD is loaded or unloaded return the panel to its original position.
Carefully align the Trim Ring with the front of the main panel.
Push the trim ring against the main panel until it clicks into plac
e.
5
01
INSTALLATION
