Goodmans G-Shot 3021Z Manual Download Page 6

Page: 6 / 63

- 6 -

Do not insert or drop metallic or inflammable foreign objects into the camera through access points such as the

memory card slot.
This may cause a fire or an electrical shock.

Do not attempt to modify this camera.

This may cause a fire or an electrical shock.

Do not remove the camera casing.

This may cause an electrical shock.
Internal inspection, maintenance and repairs should only be carried out by your dealer or local authorized
service facility.

Avoid using this camera in the bathrooms.

Exposure to excessive moisture may cause a fire or an electrical shock.

Do not touch the power plug during a thunderstorm if you are using the AC power adapter.

This may cause an electrical shock.

Never operate this camera in any way while driving a vehicle.

This may cause a traffic accident.

Summary of Contents for G-Shot 3021Z
































































Search results

Summary of Contents for G-Shot 3021Z

Reviews:

Related manuals for G-Shot 3021Z

Brands by name

Popular brands

Goodmans G-Shot 3021Z, Manual

Search results

Summary of Contents for G-Shot 3021Z

Reviews:

Related manuals for G-Shot 3021Z

Brands by name

Popular brands