4
8
10
9
8. Place previously removed door over the lower base
(F),
and secure access door
(G)
to base using the 4 previously
removed screws.
9. Once post has been assembled, Insert the 3 Medium
Base LED bulbs (included) into the socket of the Three-Head
Lantern
(B)
and turn clockwise until the bulbs seats into
place.
DO NOT
force the bulbs.
Screw Hole
F
G
11.
RESTORE POWER AT THE CIRCUIT BREAKER.
Turn
on the wall switch.
10. Use silicone adhesive caulking (not included) to seal
the gap between the wall plate and the mounting surface to
prevent water seepage into the j-box.
7
7. Connect the fixture’s ground wire to the ground wire in the
wire conduit using the provided wire nuts
(EE)
. The ground
wires can be either green or bare copper.
Secure the fixture
ground wire to the ground terminal (green screw) located
in the lower base.
Connect the ‘H’ smooth extension wire
with the black supply lead using the wire nut
(EE)
. Connect
the ‘N’ ribbed extension wire with the white supply lead using
the Wire Nut
(EE)
Securely attach the wire nuts properly to
prevent the wires from coming loose.
EE
White supply wire
Black supply wire
H. Smooth wire
N. Ribbed wire
Ground wire
Fixture
Ground wire
