3
3
3. Place the base over the extended portion of the Expansion
Bolts
(AA)
. Screw the 4 Hex nuts
(BB)
, Lock washers
(CC)
,
and flat washers
(DD)
onto the Expansion Bolts
(AA).
Using
a wrench (Not Provided)
,
secure the lower base
(F)
to the
surface.
5.Place upper post
(C)
over the lower post
(D).
Line up screw
holes and ensure all square edges of post
(C)
and
(D)
align
.
Using 3 of the pre-installed screws
(FF),
secure the 2 posts
together
.
F
BB
AA
DD
CC
5
6
Screw
Holes
C
D
D
C
4
4. Place the Three-Head Lantern
(B)
over the upper post
(C).
Line up screws holes. Using 3 of the pre-installed screws
(FF),
secure the Three-Head Lantern
(B)
to installed post
(C).
Screw Holes
C
B
B
FF
6. Place lower post
(D)
over the upper base
(E).
Line up
screws holes. Using 3 of the pre-installed screws
(FF),
secure
post to upper base
(E).
Allow wires to pass through post to
the lower base
(F).
Screw Holes
E
E
D
D
FF
FF
The 3 Lanterns come fully assembled together but screws may come loose
in transit so before fully assembling, ensure all screws are tightened on the
lanterns.
