golmar TSzena ML, Manual

Page: 35 / 48

34
.
D
escription of the RC-Szena monitor connector
a.
b.
.
c. .
d. .
e. .
f. .
g. :
Monitor attachment hooks
Wall attachment holes
Terminal connection label
Attachment clip
Identification label
Wiring input hole
Installation terminals
(x2).
1. Positiv .
2.
.
3 Vin,
4. Malla .
5. Vout,
6. .
7. .
8. .
9. Ground.
10.
.
11. Positive.
12.
.
13. .
14. .
e
Ground
. Mp, twisted pair video signal / video signal coaxial input.
(shield)
Vp, twisted pair video signal / video signal coaxial output.
Audio communication
Digital communication
Door bell push button input
Auxiliary call repeater output
Intercom function
Voltage free contact
Voltage free contact
*
*
*
( )
( )
MONITOR CONNECTOR DESCRIPTION
( )
33
MONITOR DESCRIPTION
b
f
g
b
d
b
e
b
a
c
andling the end of line jumper
H
.
The end of line jumper is placed on the video module of the
CN2 connector, that is located on the back side of the
monitor
Do not remove the jumper on monitors where the video cable
finish Remove the jumper on monitors where the video
cable continue
.
.
.
CN2
escription front panel led s push buttons.
D
'
Function and menu push buttons, have some LEDs that will indicate the state which is the monitor:
LED LED
BLUE LED s '
Switch off
At rest
Picked up (function mode)
Picked up (busy bus)
Call from door panel
(monitor ringtone)
Video spy with door panel
Communication with door
panel
Call from
(monitor ring tone)
porter's exchange
Video spy with porter's
exchange
Communication with porter's
exchange
Call from monitor
(monitor ringtone)
Communication with monitor
Call to
monitor
(monitor ringtone)
porter's exchange
or
Call to
monitor (busy bus)
porter's exchange
or
OFF
Red ON
Red blinking
Red blinking
Green
quick blinking
Green ON
Green
slow blinking
OFF
OFF
Orange ON
Orange
slow blinking
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
OFF
*
( )
*
( )
*
( )
In this function mode the monitor will give a busy bus tone.
Green
slow blinking
Green
slow blinking
Green ON
Green
slow blinking
Green
slow blinking
Green ON
Red ON
Orange
quick blinking
The twisted pair video module (RF-0106) that is placed on the back side of the monitor (see page 31),
has to be replaced by the coaxial module (RF-0107) that it is supplied with the monitor to receive
the video signal through coaxial
.