golmar 2PLUS, Installation Manual

Page: 8 / 28

DOOR PANEL INSTALLATION
ush buttons wiring.
P
Plug the push buttons connecting wires in the CN4 connector
of the sound module EL520, this wire consists of 10
conductors (P1 to P8, B and CP) for the push buttons
connection or encoder circuits EL516SE.
The CP terminal must be connected to the push buttons
common terminal and to the CP terminal of the push buttons
encoder circuit. Attach B terminal with the B terminal of the
encoder.
Join the push buttons entries (P1...P8) with the push buttons
and/or encoder circuits (P) as in the example given.
60
EL-516SE
B CP P
CN1
CN4
EL516SE
Description CN2 conector
1
2
3
4
9
10
11
12
13
14
15
5
6
7
8
CN2 CN3
CP: Black
B:
Red
P9: Green
P10: Orange
P11: Blue
P12: Violet
P13: Yellow
P14: White
P15: Brown
: Grey ( )
EL516SE
Description CN3 conector
**
P5
P6
P7
P8
P4
P3
B
To other encoders or push buttons
CP
P2
IMPORTANTE: In case of more than one access, wire all the push buttons and modules EL-516SE
following the same order in all the door panels.
CP
P8
B
P7
P1
P6
P2
P5
P3
P4
Top view
CP: Black
B:
Red
P1: Green
P2: Orange
P3: Blue
P4: Violet
P5: Yellow
P6: White
P7: Brown
P8: Grey
Colours codes
CP
P8
B
P7
P1
P6
P2
P5
P3
P4
Top view
CP: Black
B:
Red
P1: Green
P2: Orange
P3: Blue
P4: Violet
P5: Yellow
P6: White
P7: Brown
P8: Grey
Colours codes
CP B
P15
P9
P14
P10
P13
P11
P12
Top view
Colours codes
EL520
Description CN4 conector
( )
No function.
**
ush button wiring.
P
DOOR PANEL INSTALLATION
lace the nameplate label of the push buttons.
P
Open the label holder.
Place the label
and close.
59
For a quality finish, pass the wires through the hole
arranged on the nearest module holder. It is advisable to
2
use wires with sections between 0,1 and 0,25mm .
Twist the call wires as shown. The call wires should be
connected to the sound module El520 or to the
corresponding push buttons encoder.
VERY IMPORTANT: Link the push buttons common terminal
of the several push buttons modules. The push buttons of
the same module are linked from factory.
This wire must be connected to the CP terminal of the
sound module EL520 and to the corresponding CP
terminal of the encoder circuit (if there is).