If your exhaust outlet comes out within the cowl area then use the
same method.
Depending on the amount of cooling required for your engine a
template for louvers in the bottom of the cowl has been provided.
Use a dremel tool to remove the material.
When the cowl clears the engine etc correctly the prop shaft
of the engine will be in the centre of the cowl.
3.The cowl is secured with four 3 x 16mm bolts and washers.
Apply nutlock onto the bolts as the vibration from the gas engine will
shake them come loose.
Summary of Contents for Corvus Racer 540 120CC
