Goldwing RC Corvus Racer 540 120CC, Manual, Page: 43 / 60

should be mounted to the fuselage side wall just behind the cowling.
Secure all cable connections neatly and firmly.
6. Assemble the throttle servo mount using the supplied laser cut parts or
there is a servo cutout in the bottom of the engine box for 100cc-130cc
engines. Mount your throttle servo and complete your linkage setup.
7. The new KUZA 1000cc(34oz) Fuel Tank with aluminum tank cap is
preassembled. Complete the installation in the fuselage using zip ties
or velcro straps to hold the tank in position. Connect a fuel line
between the tank and carb, a fuel line between the tank vent and the
bottom of the fuselage, and a fill line to a fueling port which can be
mounted on the fuselage side opposite your ignition switch. Make sure
your vent line does not come close to any hot exhaust part such as the
muffler or canister. recommends the use of small zip ties or fuel line
clamps to secure the lines to the tank.
100 cc servo location
100 cc servo location