Goldwing RC 9975000025-0, Manual

Page: 53 / 59

All contents copyright 2015, GoldWing RC Version 4.0, June 2015
5
．
Side force generators assembly.
Cut the wing film needed to be install the SFG. To fix the SFG use M3x16 Hex bolts and washers.
6. Fill your fuel tank making sure your vent line is not plugged or capped. With the canopy off,
this is a good time to check for any fuel leaks.
7. Position the canopy in place and tighten ALU Canopy Bolts. Be sure to use the supplied PTFE
washers under the screw heads.