Goldwing RC 9975000025-0, Manual

Page: 52 / 59

All contents copyright 2015, GoldWing RC Version 4.0, June 2015
3
．
Installation of Elevators
Connect servo extension wire, secure with safe clips.
Attach elevators with 3x12mm Hex-head bolts and washers. Check these after every flight.
4
．
Install the wings onto the fuselage being careful to align the wing tube with the wings and not
force it. The wing tube may be initially tight but will loosen after some with use. Guide your servo
wires into the fuselage openings and connect to the correct aileron channels. Servo clips are highly
recommended. Once you have the wings fully seated in the fuselage tighten the wing bolts inside
the fuselage.