Goldwing RC 9975000025-0, Manual

Page: 29 / 59

All contents copyright 2015, GoldWing RC Version 4.0, June 2015
4. Install the main wheel axles to the composite landing gear and tighten the nylon-insert lock nut.
Install one wheel collet onto the axle. Use a second wheel collar as a guide to leave a gap on the
inboard of the axle. Use a small drop of thread-lock and tighten in place. Slide the wheel onto the
axle and install a second wheel collar also using thread-lock on the set screw. For greater
strength, filing a flat where the grub screw mounts will stop the collet being able to be turned.