Goldwing RC 9975000025-0, Manual

Page: 22 / 59

All contents copyright 2015, GoldWing RC Version 4.0, June 2015
3
．
To fit the rudder to the fin, locate the rudder hinge wire and insert. To make it easier to insert
twist as it is inserted.
4. The SU26M can use either closed loop or a rear push pull servo for the rudder. We recommend
that you balance the model assembled before choosing your servo placement.
5. The SU26M is supplied with a high quality set of pull-pull cables and ball-links.
6. Install your rudder servo into the precut locations in the fuselage. Using a fine drill pre-drill the
holes and drop thin CA into the holes to strengthen the wood. You will need 3 inch arms on the
servo. Set up your radio accordingly and center the rudder servo.
7
．
Aluminum dual servo arm are include in the kit, enlarge the control holes with 3mm drill bit.