Goldwing RC 9975000025-0, Manual

Page: 40 / 59

All contents copyright 2015, GoldWing RC Version 4.0, June 2015
2. Fit the Cowl and measure the distance from the engine bulkhead to the front of the cowl, add
approx 2-3mm for the spinner back plate and this is the length that your engine should be set
Using the correct length stand offs, mount your engine securely using bolts, 20mm POM washers,
and locknuts. The use of thread-lock is also highly essential for the engine bolts.
3. Mount the ignition module according to the manufacturer’s instructions. The best place to
mount it is on the side of the engine box. Secure the pickup lead and ignition wires with zip ties so
that they do not vibrate or touch any hot part of the engine or exhaust.