Specifications
5
3.
Specifications
3.1 General Description
A commercial, heavy duty gas fryer with fast heating and economic oil requirements
. The ‘V’ shaped
tank design is automatically controlled by a gas-powered valve with an inbuilt regulator. The body is
made from high grade stainless steel for lasting durability and finish.
3.2 Model numbers covered in this manual:
▪
VFG-1
- Single 20L Tank
▪
VFG-T
- Double 16L per Tank
▪
VFG-24
- Single 36L Tank
3.3 Gas Supply Requirements:
Natural Gas
LPG (Propane)
VFG-1
97 MJ/hr
95 MJ/hr
VFG-T
105 MJ/hr
100 MJ/hr
VFG-24
127 MJ/hr
127 MJ/hr
Supply Pressure
1.13
–
3.5 kPa (5.0 SIT NOVA)
2.75
–
3.5 kPa (5.0 SIT NOVA)
Operating Pressure
1.00 kPa (0.7kPa VFG24)
2.50 kPa
Gas Connection
¾” BSP Male
The operating pressure is factory pre-set and should not be adjusted. However, if further adjustment
is required, measure the operating pressure at the test point and proceed to adjust pressure at the
appliance gas valve with the unit running. Refer to the Gas Conversion section of this manual for
more detailed instructions.
3.4 Injector Sizes
Model
Gas Type
Main Injector
Lighting Injector
Rear Injector
Pilot Injector
VFG-1
NG
1.5
1.4
NA
0.51
LPG
0.95
0.85
NA
0.35
VFG-T
NG
1.5
NA
NA
0.51
LPG
0.95
NA
0.85
0.35
VFG-24
NG
1.95
1.75
1.3
0.55
LPG
1.2
1.05
0.85
0.35
3.5 Rating Plate Data
Rating plates are marked with the appropriate corresponding injector sizes i.e.:
L: Lighting injector
M: Main injector
R: Rear injector
NOTE:
Injectors listed in the data table with N/A are
MAIN
injector sizes relative to the appropriate
model and gas type. The stamped number on the head of the pilot is not a dimension.
