Gold's Gym XRS 20, User Manual

Page: 10 / 16

10
10. Insert the Long Pad Tube (36) into the bracket
on the Front Leg (4). Then, slide two Foam Pads
(22) onto the Long Pad Tube, and press two Pad
Caps (23) into the Long Pad Tube.
Repeat this step with the two Short Pad
Tubes (21) and the Leg Lever (5).
10
23
23
4
5
22
22
36
21
21
Bracket
9. Apply grease to the barrel of an M10 x 77mm
Bolt Set (45).
Attach the Leg Lever (5) to the Front Leg (4) with
the M10 x 77mm Bolt Set (45). Make sure that
the barrel of the Bolt Set is inserted through
both sides of the bracket on the Front Leg.
9
4
45
45
Grease
5
11. Attach the Bumper (30) to the Curl Bar (17) with
an M4 x 19mm Screw (42).
Next, attach the Curl Bar (17) to the Leg Lever
(5) with the Curl Bar Pin (33).
Then, attach the Tether (34) on the Curl Bar Pin
(33) to the Leg Lever (5) with an M4 x 19mm
Screw (42).
11
17
30
42
5
33
34
Bracket
42