9
6. Using a plastic bag to keep your fingers clean,
apply some of the included grease to an M10 x
165mm Bolt (49).
Attach the Backrest Post (15) to the Backrest
Frames (16) with the M10 x 165mm Bolt (49),
two M10 Washers (39), and an M10 Locknut
(12).
Do not tighten the Locknut yet.
Then, attach the Backrest (19) to the Backrest
Frames (16) with four M6 x 40mm Screws (48)
and four M6 Washers (38).
Do not tighten the
Screws yet.
7. Apply grease to an M10 x 165mm Bolt (49).
Attach the Backrest Frames (16) to the Frame
(1) with the M10 x 165mm Bolt (49), two M10
Washers (39), and an M10 Locknut (12).
Do
not overtighten the Locknut; the Backrest
Frames must pivot easily.
Then, set the end of the Backrest Post (15) in
one of the slots in the Frame (1).
See step 6.
Tighten the M10 Locknut (12) and
the four M6 x 40mm Screws (48).
Do not over-
tighten the Locknut; the Backrest Post (15)
must pivot easily.
6
19
49
39
16
38
38
15
39 12
48
48
7
16
1
39
15
Slot
39
49
Grease
Grease
Wide
End
8. Attach the Weight Tube (24) to the Leg Lever
(5) with an M8 x 70mm Bolt (44), a Spacer (14),
two M8 Washers (37), and an M8 Locknut (11).
Then, press a 25mm Round Outer Cap (13) onto
the Weight Tube.
Next, press the Adapter Cap (9) into the Olympic
Adapter (8), and slide the Olympic Adapter onto
the Weight Tube (24). Then, tighten an M8 x
10mm Set Screw (7) into the
bottom
of the
Olympic Adapter.
8
5
11
37
14
13
37
44
24
8
9
7
12
Summary of Contents for XRS 20
Page 4: ...4 STANDARD SERVICE PLANS...
