9
23
Batteries
Batteries
Battery
Cover
9
8. While a second person holds the Console Plate
(75) near the Upright (2), insert the Wire
Harness (73) and the Pulse Wires (84) upward
through the Console Plate.
Tip: Avoid pinching the wires.
Attach the
Console Plate (75) to the Upright (2) with two
M6 x 13mm Patch Screws (81).
8
75
81
2
73, 84
Avoid pinching
the wires
9. The Console (23) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents.
Remove the battery cover and insert the
batteries into the battery compartments.
Make
sure to orient the batteries as shown by the
diagrams inside the battery compartments.
Then, reattach the battery cover. Note: The bat-
tery cover may be attached with screws.
To purchase an optional power adapter, call
the telephone number on the front cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied power
adapter.
Plug one end of the power adapter
into the receptacle on the console; plug the
other end into an outlet installed in accordance
with all local codes and ordinances.
