5
M10 Split
Washer (45)–2
M10 Locknut
(33)–2
M10
Washer (83)–2
M8 Locknut
(38)–8
M8 x 43mm Button Bolt (50)–6
M10 x 25mm
Patch Screw (40)–2
M10 x 78mm Button Bolt (34)–4
Small Wave
Washer (69)–2
M8 Split
Washer (28)–6
M8 x 25mm Patch
Screw (56)–2
M8 Washer
(55)–8
M8 x 80mm Patch Bolt (79)–2
M6 Bolt Set (25)–2
Large Wave
Washer (76)–2
M10 x 74mm Button Bolt (7)–2
M4 x 10mm
Blunt Screw
(82)–2
M4 x 16mm
Self-tapping
Screw (52)–10
M6 x 13mm
Patch Screw
(81)–2
M8 x 14mm Button
Screw (27)–6
ASSEMBLY
To hire an authorized service technician to assemble the elliptical, call 1-800-445-2480.
Assembly requires two persons.
Place all parts of the elliptical in a cleared area and remove all packing mate-
rials; do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
, an adjustable
wrench
, and a rubber mallet
.
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if
it has been preassembled. To avoid damaging parts, do not use power tools for assembly.
