25
58. Attach the Leg Bumper (135) to the Front Leg
(109) with an M4 x 16mm Screw (82).
Attach the Front Leg (109) to the Bench Frame
(107) with two M10 x 73mm Hex Bolts (105), two
M10 Washers (84), and two M10 Locknuts (79).
See steps 57 and 58. Tighten the M8 Locknuts
(78) and the M10 Locknuts (79).
82
135
58
109
79
84
105
107
78
57
108
143
107
57. Attach the Bench Stabilizer (108) to the Bench
Frame (107) with two M8 x 76mm Carriage Bolts
(143) and two M8 Locknuts (78).
Do not tighten
the Locknuts yet.
56. Attach two Plastic Foot Plates (50) to the Bench
Stabilizer (108) with four M4 x 10mm Screws
(95).
108
50
50
95
56
95
59. Apply a small amount of the included grease to
an M10 x 82mm Button Bolt (106). Attach the Leg
Lever (110) to the Front Leg (109) with the Button
Bolt and an M10 Locknut (79).
Do not overtight-
en the Locknut; the Leg Lever must pivot
easily.
59
110
106
Grease
79
109