8. Orient the two Carriage Guides (64) with the rings
near the bottom. Attach the Carriage Guides to
the Center Base (2) with an M10 x 154mm Button
Bolt (99), two M10 Washers (84), two 6mm
Spacers (75), and an M10 Locknut (79).
Do not
tighten the Locknut yet.
Slide two Carriage Bumpers (27) onto the
Carriage Guides (64). Slide the Weight Carriage
(41) onto the Carriage Guides as shown.
8
99
84
84
79
2
75
27
41
64
64
27
7. Attach an Upright Cap (34) to the Left Upright (3)
with two M4 x 16mm Screws (82).
Attach the Left Upright (3) to the left Base (1) with
the indicated two M10 x 65mm Carriage Bolts
(83) and two M10 Locknuts (79).
Do not tighten
the Locknuts yet
.
Repeat this step with the Right Upright (not
shown).
79
82
82
34
1
1
83
10
3
7