![background image](http://html.mh-extra.com/html/golds-gym/platinum/platinum_user-manual_2239723028.webp)
28
66
128
129
128
115
129
110
109
66. Insert a Pad Tube (129) through the Leg Lever
(110). Slide two Foam Pads (128) onto the Pad
Tube.
Repeat this step with the other Pad Tube (129)
and the Leg Lever (110), and the Long Pad Tube
(115) and the Front Leg (109).
68
112
142
95
141
82
68. Attach the Curl Bumper (141) to the Curl Bar
(112) with an M4 x 16mm Screw (82).
Attach the Curl Pin (142) to the Curl Bar (112)
with an M4 x 10mm Screw (95).
114
113
148
67
67. Attach the Curl Pad (114) to the Curl Post (113)
with two M6 x 19mm Screws (148).
69.
Make sure that all parts are properly tightened.
The use of all remaining parts will be explained in
ADJUSTMENT starting on page 29.
Before using the weight bench, pull each cable a few times to make sure that the cable moves smoothly. If a
cable does not move smoothly, find and correct the problem.
IMPORTANT: If the cables are not properly
installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on pages 32
and 33 for proper cable routing. If there is any slack in the cables, you will need to remove it by
tightening the cables. See MAINTENANCE on page 34.