24
54. Slide a Weight Bumper (37) onto each storage
tube on the Left Support (6).
Make sure that the
flat edge of each Weight Bumper is facing the
outside of the Left Support.
Slide a Weight Bumper (37) onto each storage
tube the Right Support (not shown).
37
37
6
87
86
30
11
53. Attach an Arm Pad (30) to the Right Arm (11) with
two M6 x 80mm Screws (87) and two M6
Washers (86).
Attach the other Arm Pad (30) to
the Left Arm (10) in the same manner.
54
55. Set a Barbell Rest (35) and a Barbell Spotter (36)
onto the Left Upright (3).
Set the other Barbell
Rest and the other Barbell Spotter onto the
Right Upright (not shown) at the same
heights.
55
36
3
35
10
30
53
